Does the larger line go from tank to bulb?
If it won't keep running, turn the "T" screw one full turn in the clockwise direction with a slot screwdriver.Raiders of the Lost Ark, but it expands every day.There is easy handling and maintenance with convenient side adjust chain tensioning along with easy access clips on the cylinder cover for fast access to filter and spark plug.Chainsaw is powerful and easy to start and operate.Quick and easy to start, it features Soft Start, purge and integrated choke/stop controls.It should be cleaned every 25 service hours, and if it's dirty, it also hinders air flow.
However, finding a manual for a specific model can lead you.
Purge bulb, which provides the carburetor with fuel and makes the product easier to start with fewer pulls, is protected, reducing the risk of damage.Effortless pull starting system reduces pull force 30 for easier starting and reduced wear on the starter mechanism.Question: Tired 1040679, i'm having trouble finding info on my Poulan Pro 260 chainsaw.While you have the air filter cover off, remove the cylinder cover, pull out the spark arrestor from behind the muffler and clean time to crack 128 bit encryption the spark arrestor screen gently with a wire brush.Indiana Jones treasure hunt.User friendly combined choke and stop control allows faster starting and greater reliability by reducing the risk of engine flooding.Ideal for general property management and firewood cutting 2-year limited warranty, on board, scrunch holder included, optional accessories: pre-mix 2-cycle fuel # replacement bar and chain - # replacement chain - # (2 pack) bar and chain oil (Qt.) - # bar and chain oil.These carburetors differ in the orientation of the adjustment screws, but you use the same procedure to tune either one.
If the chain turns when the saw is idling, the idle is too fast, so turn it down until the chain stops turning, then find the setting at which the engine sounds best and doesn't stall.
Remove the air filter cover by loosening the retaining nut with your fingers, take out the filter and clean it with soapy water or replace.